Weight is 2.92 lbs
Height: assembled: 16.125 inches
Height: unassembled: 10.750 inches (as shipped) (height of
tower)
Length: 12.000
Width: 3.250
Non vacuum flat based cup design.
Integrated Degree tape showing pull back angle from 90 degrees
vertical to 180 degrees horizontal.
Inlaid degree mark on arm for aligning pull back angle on degree
tape.
Marking on base and tower engraved mill work.
Reinforced Lap design Rubber
Band. Band exceeds federal specification AA-131-A
Pad is high durometer
3M™ Bumpon™
adhesive backed: removable and replaceable.
Material: Red Oak with stainless and coated carbon steel hardware.
Adjustable slot width. Use torque driver with #2 Square bit.
Adjustment screws are on the bottom and sides of unit.
All external corners have broken edges.
Only the band holder peg on the tower is glued.
Finish: Satin Finish over sealer, water soluble.
Warranty: 2 years from shipment month.
Date Code on bottom.
Shipped with assembled arm detached. Both unit and arm are
protected with bubble wrap.Shot
Distance up to 240 inches.
All shipments include invoice, packing slip, assembly and
adjustment instructions.
 
 
  |
Special
Offer! 
